量子电子学报 ›› 2024, Vol. 41 ›› Issue (2): 226-234.doi: 10.3969/j.issn.1007-5461.2024.02.005

• 光谱与光谱技术 • 上一篇    下一篇

傅里叶变换红外光谱自适应数字滤波算法研究

孟伍德1,童晶晶2,高闽光3,李相贤4,李妍5,韩昕6,刘文清2   

  1. ( 1 中国科学院合肥物质科学研究院安徽光学精密机械研究所, 中国科学院环境光学与技术重点实验室, 安徽 合肥 230031; 2 中国科学技术大学, 安徽 合肥 230026 )
  • 收稿日期:2022-03-09 修回日期:2022-11-25 出版日期:2024-03-28 发布日期:2024-03-28
  • 通讯作者: E-mail: mggao@aiofm.ac.cn E-mail:E-mail: mggao@aiofm.ac.cn
  • 作者简介:孟伍德 ( 1995 - ), 宁夏银川人, 研究生, 主要从事红外傅里叶变换光谱仪信号处理方面的研究。 E-mail: mwdshuyu@mail.ustc.edu.cn
  • 基金资助:
    国家自然科学基金(42075135), 浙江省重点研发计划项目(2021C65)

Research of adaptive digital filtering algorithm for Fourier transform infrared spectroscopy

MENG Wude 1, 2, TONG Jingjing 1*, GAO Minguang 1, LI Xiangxian 1, LI Yan 1, HAN Xin 1, LIU Wenqing 1   

  1. ( 1 Key Laboratory of Environmental Optics and Technology, Anhui Institute of Optics and Fine Mechanics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China; 2 University of Science and Technology of China, Hefei 230026, China )
  • Received:2022-03-09 Revised:2022-11-25 Published:2024-03-28 Online:2024-03-28

摘要: 针对傅里叶变换红外 (FTIR) 光谱仪在不同类型环境噪声下导致的仪器性能下降的问题, 提出了一种根据 不同环境噪声实时更新滤波参数的自适应滤波算法。对该算法的基本原理和实现过程进行了理论推导, 分析了不同 滤波参数设置下的滤波效果, 进而利用设计的滤波算法对实测光谱数据进行了滤波处理, 对比分析了不同滤波方法 下的光谱信噪比 (SNR)。研究结果表明: 基于巴特沃斯滤波的自适应FTIR 光谱滤波方法在2100~2200 cm-1和2500 ~2600 cm-1波段的SNR 较传统硬件滤波分别提高了1.29 倍和1.13 倍, 表明该算法可以有效提升FTIR 光谱信噪比, 改 善FTIR 仪器的性能指标。

关键词: 光谱学, 数字滤波, 巴特沃斯滤波器, 傅里叶变换红外光谱, 信噪比

Abstract: To address the issue of instrument performance degradation of Fourier transform infrared (FTIR) spectrometers caused by different types of environmental signal noise, an adaptive filtering algorithm, which can update filtering parameters in real-time based on different environmental noise levels, is proposed in this work. The basic principle and implementation process of the algorithm are theoretically deduced, and the filtering effect under different filtering parameters is analyzed. Then, the proposed filtering algorithm is used to filter the measured spectral data, and the spectral signal-to-noise ratio (SNR) of different filtering methods is compared and analyzed. The results show that the SNRs of the adaptive filtering algorithm in 2100-2200 cm-1 and 2500-2600 cm-1 bands are 1.29 times and 1.13 times those of the traditional hardware filtering, respectively, indicating that the adaptive filtering algorithm proposed can effectively improve SNR of FTIR spectrum and the performance index of FTIR instrument.

Key words: spectroscopy, digital filter, Butterworth filter, Fourier transform infrared spectroscopy, signal to noise ratio

中图分类号: