J4 ›› 2016, Vol. 33 ›› Issue (6): 751-756.

• 激光应用 • 上一篇    下一篇

Sr3Ga2O5Cl2:Sm3+荧光粉的制备及发光特性

王中华,张绍安,胡义华   

  1. 广东工业大学物理与光电工程学院,广东 广州,510006
  • 收稿日期:2015-07-23 修回日期:2015-08-29 出版日期:2016-11-28 发布日期:2016-11-28
  • 通讯作者: 胡义华(1958-),教授,主要研究方向为无机发光材料。 E-mail:huyh@gdut.edu.cn
  • 作者简介:王中华(1989-),研究生,主要研究方向为稀土发光材料。 E-mail: 350487328@qq.com
  • 基金资助:
    Supported by National Natural Science Foundation of China(国家自然科学基金, 21471038)

Preparation and luminescent properties of Sr3Ga2O5Cl2:Sm3+ phosphor

WANG Zhonghua, ZHANG Shao’an, HU Yihua   

  1. School of Physics and Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006, China
  • Received:2015-07-23 Revised:2015-08-29 Published:2016-11-28 Online:2016-11-28

摘要: 采用传统的高温固相法成功合成了Sr3-xGa2O5Cl2:Sm3+系列橙红色荧光粉。使用X射线衍射仪(XRD)测试了样品的晶体结构,样品的形貌和颗粒尺寸由扫描电子显微镜(SEM)表征,使用荧光光谱仪测试了样品的光致发光光谱和衰减寿命。Sr3Ga2O5Cl2晶相为单斜结构,掺杂的Sm3+离子取代Sr2+的格位成为荧光粉的发光中心。样品的激发光谱由O2-→Sm3+的电荷迁移带和Sm3+离子4f内层电子的特征激发峰组成,位于230 nm、404 nm的激发峰较强。发射光谱的峰值位于565、601、650 nm处,分别对应于Sm3+的4G5/2→6H5/2、4G5/2→6H7/2、4G5/2→6H9/2特征跃迁。样品的发光强度随着Sm3+浓度的增加先增大后减小,最佳掺杂浓度为3.0% mol。根据实验数据对浓度淬灭的原因进行了探讨,浓度淬灭机理为电偶极-电偶极相互作用。

关键词: 发光材料;Sr3Ga2O5Cl2:Sm3+;荧光粉;浓度淬灭

Abstract: A series of orange-red phosphors Sr3Ga2O5Cl2:Sm3+ are synthesized by the traditional high temperature solid-state method. The crystal structure of the sample is tested by X - ray diffraction (XRD), and its morphology and particle size are characterized by scanning electron microscopy (SEM). Photoluminescence spectra and decay lifetimes of the samples were measured using a fluorescence spectrometer. The crystal phase of Sr3Ga2O5Cl2 is monoclinic structure. Sm3+ ions replace Sr2+ sites to be the luminescence center of fluorescent powder. The excitation spectra of samples are composed of charge transfer band O2-→Sm3+ and characteristic excitation peaks of Sm3+ 4f inner-layer electrons, and the excitation peaks located at 230 nm and 404 nm are stronger. The peaks of emission spectra are located at 565, 601, 650 nm, which corresponds to the characteristic transition of Sm3+ from 4G5/2 level to 6H5/2, 6H7/2, 6H9/2 levels, respectively. The luminescent intensity of samples increases first and then decreases with the increasing of Sm3+ concentration, and the best doping concentration is 3.0% mol. Based on the experimental data, the reason of concentration quenching is discussed. The concentration quenching mechanism is electric dipole-dipole interaction.

Key words: luminescent materials; Sr3Ga2O5Cl2:Sm3+; phosphor; concentration quenching

中图分类号: