Chinese Journal of Quantum Electronics

Previous Articles     Next Articles

Research on surface reflectivity measurement system based on ratio method

HOU Zhikuan1,2, ZHANG Yanna1, LI Xin1, LIU Enchao1*, ZHANG Quan1, XU Haidong1,2, ZHENG Xiaobing1   

  1. 1 Key Laboratory of Optical Calibration and Characterization, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei 230031, China; 2 University of Science and Technology of China, Hefei 230026, China
  • Published:2019-09-28 Online:2019-09-18

Abstract: In order to realize long-term automatic observation of surface reflectivity and improve the frequency of site calibration, a method of surface reflectivity measurement based on ratiometric radiation measurement is proposed. Synchronous observation is carried out by using spectally-reflect automatic spectroradiometer and hyperspectral irradiance meter. Surface radiance and total atmospheric illuminance at the same time are obtained, and the surface reflectance parameters can be obtained by the ratio method. The laboratory radiation calibration based on standard radiation source is designed to obtain the calibration coefficients of the radiometer and illuminometer respectively, and then the input system parameters based on the ratio method to measure the surface reflectivity are obtained. The standard board measurement comparison experiment is carried out outdoors. The relative deviation between the visible-near-infrared ratio radiation measurement and the reference plate reflectance value after laboratory calibration is within 3%, and the effectiveness of the measurement system is verified.

Key words: radiometry, ground reflectance, spectroradiometer, irradiance meter