J4 ›› 2012, Vol. 29 ›› Issue (2): 209-214.

• 激光应用 • 上一篇    下一篇

用激光诱导等离子体光谱法分析碳钢样品中碳元素的实验研究

费腾1 王秋平2 鲁先洋1 王声波1 潘从元2   

  1. 1 中国科学技术大学光学与光学工程系, 安徽 合肥 230026;
    2 中国科学技术大学国家同步辐射实验室, 安徽 合肥 230029
  • 收稿日期:2011-01-17 修回日期:2011-03-31 出版日期:2012-03-28 发布日期:2012-02-28
  • 通讯作者: 王声波(1962-)安徽巢湖人,副教授,主要从事强激光与物质相互作用理论和实验研究. E-mail:sbwang@ustc.edu.cn
  • 作者简介:费腾(1986-)安徽人,研究生,主要从事强激光与物质相互作用研究. E-mail :feiteng@mail.ustc.edu.cn

Experimental analysis of carbon content in carbon steel by laser induced plasma spectroscopy method

FEI Teng1, WANG Qiu-ping2, LU Xian-yang1, WANG Sheng-bo1, PAN Cong-yuan2   

  1. 1 Department of Optics and Optical Engineering, University of Science and Technology of China, Hefei 230026, China; 
    2 National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China
  • Received:2011-01-17 Revised:2011-03-31 Published:2012-03-28 Online:2012-02-28

摘要:

激光诱导等离子体光谱法作为一种新兴的元素成份分析方法近年受到广泛关注,采用这种方法可以快速对物体进行元素成分的定量分析。在实验中用激光诱导等离子体光谱法(LIPS)来测量碳钢中的碳含量。将Nd:YAG激光器发射的激光聚焦到样品表面产生等离子体,选择等离子体发射光谱中的193.09nm碳谱线进行分析。得到固态碳钢样品的碳含量的定标曲线,检测限为460ppm。这个结果说明LIPS方法可以用于钢铁中元素成份的直接定量测量。

关键词: 光谱学, 激光诱导等离子体光谱, 定量分析, 定标曲线, 碳钢

Abstract:

Laser induced plasmas spectroscopy (LIPS) has acquired great interest in recent years as a new method of elemental analysis, qualitative information about the elemental composition of an object can be rapidly obtained using LIPS. In the experiment, laser induced plasma spectroscopy (LIPS) was used to determine the carbon content in carbon steel. The plasma was formed by focusing a Nd: YAG laser on the sample surface. By the optical emission spectroscopy of the plasma, the 193.09nm C line was selected to be determined. The calibration curve was obtained, and the detection limit was within 460ppm. The results show that this technique can be applied for direct composition determination in steel analysis.

Key words: spectroscopy, laser induced plasma spectroscopy, quantitative analysis, calibration curve, carbon steel

中图分类号: