阵列靶防护取样面板热效应仿真分析

doi:10.3969/j.issn.1007-5461.2023.06.008

量子电子学报 ›› 2023, Vol. 40 ›› Issue (6): 879-887.doi: 10.3969/j.issn.1007-5461.2023.06.008

阵列靶防护取样面板热效应仿真分析

张凯 1,2,3, 谭逢富 2,3*, 侯再红 2,3, 黄志刚 2,3, 仇陈祥 2,3, 张巳龙 2,3, 吴毅 1,2,3

( 1 中国科学技术大学环境科学与光电技术学院, 安徽合肥 230026; 2 中国科学院合肥物质科学研究院安徽光学精密机械研究所, 中国科学院大气光学重点实验室, 安徽合肥 230031; 3 先进激光技术安徽省实验室, 安徽合肥 230037 )

收稿日期:2022-01-06 修回日期:2022-03-06 出版日期:2023-11-28 发布日期:2023-11-28
通讯作者: tanfengfu@163.com E-mail:tanfengfu@163.com
作者简介:张凯 ( 1996 - ), 安徽六安人, 研究生, 主要从事光电测量设备热设计和仿真分析方面的研究。E-mail: m15001787717@163.com
基金资助:
国家自然科学基金面上基金(41875033)

Simulation analysis of thermal effects of protective sampling panel for array target

ZHANG Kai 1,2,3 , TAN Fengfu2,3* , HOU Zaihong2,3 , HUANG Zhigang2,3 , QIU Chenxiang2,3 , ZHANG Silong2,3 , WU Yi 1,2,3

( 1 School of Environmental Science and Optoelectronic Technology, University of Science and Technology of China, Hefei 230026, China; 2 Key Laboratory of Atmospheric Optics, Anhui Institute of Optics and Fine Mechanics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China; 3 Advanced Laser Technology Laboratory of Anhui Province, Hefei 230037, China )

Received:2022-01-06 Revised:2022-03-06 Published:2023-11-28 Online:2023-11-28

摘要/Abstract

摘要： 探测器阵列靶是测量激光光斑分布的常用设备, 在高功率激光长时间辐照下阵列靶的取样面板需要更高的抗损伤能力。为了提高取样面板的抗损伤能力，从热设计角度出发，基于Ansys Workbench有限元分析软件，比较了不同厚度、不同热管排布方式以及不同界面传热系数下, 防护取样面板在高功率激光长时间辐照下的温度场和热应力。分析结果表明，添加十字热管排布后，在激光辐照 120 s 时， 6 mm 厚度的取样面板耐受峰值功率密度从 1470.9 W·cm-2 提高至3632.1 W·cm-2 。该仿真分析为阵列靶防护取样面板的设计提供了有效的理论和数据支持。

关键词: 激光技术, 探测器阵列靶, 有限元分析, 热分析, 静力学分析

Abstract: Detector array target is a common device for measuring the distribution of laser spot, and the sampling panel of array target needs higher damage resistance under long-term high-power laser irradiation. In order to improve the damage resistance of the sampling panel, based on the finite element analysis software Ansys Workbench, from the perspective of thermal design, the research compares the temperature field and thermal stress of the protective sampling panels with different thicknesses, different heat pipe arrangements and different interface heat transfer coefficients under long-term high-power laser irradiation. The analysis results show that after adding a cross heat pipe arrangement, the withstand peak power density of the sampling panel with a thickness of 6 mm increases from 1470.9 W·cm-2 to 3632.1 W· cm-2 when the laser irradiation lasts for 120 s. This simulation analysis provides effective theoretical and data support for the design of protective sampling panel for array target.

Key words: laser technology, detector array target, finite element analysis, thermal analysis, static analysis

中图分类号:

TN247

张凯, 谭逢富, 侯再红, 黄志刚, 仇陈祥, 张巳龙, 吴毅, . 阵列靶防护取样面板热效应仿真分析[J]. 量子电子学报, 2023, 40(6): 879-887.

ZHANG Kai , , TAN Fengfu, , HOU Zaihong, , HUANG Zhigang, , QIU Chenxiang, , ZHANG Silong, , WU Yi , . Simulation analysis of thermal effects of protective sampling panel for array target[J]. Chinese Journal of Quantum Electronics, 2023, 40(6): 879-887.

参考文献

[1]Tan Fengfu. Research on Development and Calibration Technology of Detector Array Target [D]. Hefei: Doctorial Dissertation of University of Science and Technology of China, 2020(in Chinese).
杨鹏翎, 冯国斌, 王振宝,et al. 测量中红外激光远场光斑的光电阵列靶斑仪[J]. 中国激光, 2010(2):5.
[2]Pao Miao. Rearch on The High-Precision Measuring Technology for The Laser Beam's Far-Field Parameters [D]. Hefei: Dotorial Dissertation of University of Electronic Science and Technology of China,2012(in Chinese).
庞淼, 周山, 吴娟,等. 激光强度时空分布测量漫散射取样衰减技术研究[J]. 红外与激光工程, 2013, 42(12):3213-3217..
[3]Tan Fengfu et al., Detector array target calibration system based on point-by-point scanning [J] Infrared and Laser Enigeering,2020.49(02): p. 241-247(in Chinese)
谭逢富, et al., 基于逐点扫描的探测器阵列靶标定系统 [J] 红外与激光工程. 2020. 49(02): p. 241-247.
[4]Li, J., et al., Numerical Simulation of Tire Steady-State Temperature Field Based on ANSYS Workbench. Key Engineering Materials, 2012. 501: p. 382-387.
[5]Cheng Xianfu. ANSYS Workbench 16.0 Basic Tutorial and Example Analysis [M]. Wuhan: Huazhong University of Science and Technology Press,2017: 184-185.
程贤福. ANSYS Workbench 16.0基础教程及实例分析 [M]. 武汉: 华中科技大学出版社, 2017: 184-185.
[6]Dong Liyuan, et al. Thermal structure analysis of tracking telescopr frame [J]. Chinese Journal of Quantum Electronics, 2019,36(47): p. 408-415.
董丽媛, et al., 跟踪望远镜机架的热结构分析 [J] 量子电子学报. 2019. 36(04): p. 408-415.
[7]Tan H, et al. ANSYS Workbench simulation of glass welding by femtosecond laser pulses [J]. Infrared Physics & Technology, 2019. 98: p. 334-340.
[8]Liu Ju. The Experimental Research on Measurement of Thermal Contact Resistance of Two Contacted Solids and Thermal Conductivity [D]. Wuhan: Master Thesis of Huazhong University of Science and Technology, 2011: 14-17.
刘菊. 固体界面接触热阻及导热系数测量的实验研究 [D]. 武汉: 华中科技大学硕士论文, 2011: 14-17.
[9]Wu Lei, Gao Ming,Zhang Tao,et al． Thermoelectric cooling application and optimization: a review [J]. Journal of Ｒefrigeration,2019,40(6): 1-12.
吴雷,高明,张涛,等.热电制冷的应用与优化综述[J].制冷学报,2019,40(6):1-12.
[10]Peng Y,et al. Research of Thermal Analysis Collaboratively Using ANSYS Workbench and SolidWorks Simulation [J]. Applied Mechanics and Materials, 2011. 127: p. 262-266.
[11]Dai, S., et al., Thermal Contact Resistance between Aero Engine Compressor Blade and Flexible Fixture. 2020(7).

[1]	段丹阳, 董云升, 张天舒, 吕立慧, 付毅宾, 高慧慧, 裴永康 . 高环境适应性全固态激光器[J]. 量子电子学报, 2023, 40(6): 858-867.
[2]	何宗武, 黄思诚, 温昕澄, 马庆力 ∗, 阴泽杰, . 应用于高速 MDI-QKD 系统的脉冲激光器研制[J]. 量子电子学报, 2023, 40(6): 868-878.
[3]	刘元煌 , 魏珊珊 , 陈雨君 , 姚波 , 毛庆和 , . 光电反馈抑制DBR单纵模光纤激光器的弛豫振荡噪声[J]. 量子电子学报, 2023, 40(5): 677-683.
[4]	刘梦媛, 齐瑶瑶, 白振旭, 张雨, 王静静, 丁洁, 王雨雷, 吕志伟, . 双波长锁模光纤激光器研究进展[J]. 量子电子学报, 2023, 40(5): 615-634.
[5]	张艳琳, 游利兵, 王宏伟, 王琪, 胡泽雄, 范军, 方晓东, . 深紫外飞秒激光脉宽测量[J]. 量子电子学报, 2023, 40(4): 469-475.
[6]	张震, 段典, 陈雨君, 魏珊珊, 马金栋, 姚波, 毛庆和 . 基于窄带耗散孤子Figure-9 光纤振荡器和单级单模光纤放大器的皮秒脉冲光纤前端[J]. 量子电子学报, 2023, 40(4): 476-482.
[7]	唐敬玲, 齐月, 白振旭, 齐瑶瑶, 丁洁, 颜秉政, 王雨雷, 吕志伟, . 基于YAG/Nd: YAG/Cr4+: YAG 键合晶体的被动调Q亚纳秒激光器[J]. 量子电子学报, 2023, 40(4): 483-491.
[8]	王长, ∗ , 宋高辉, , 谭智勇, , 曹俊诚, ∗. 基于半导体光子学器件的太赫兹成像技术研究进展 (封面文章}[J]. 量子电子学报, 2023, 40(2): 181-192.
[9]	陈雨君姚波刘昊炜魏珊珊毛庆和. 基于石英玻璃掺铥光纤的单纵模 DBR 光纤激光器的研制[J]. 量子电子学报, 2023, 40(1): 56-61.
[10]	魏士钦王瑶王梦真王芳刘俊杰刘玉怀. 基于阱式阶梯电子阻挡层的深紫外激光二极管性能研究[J]. 量子电子学报, 2023, 40(1): 62-68.
[11]	胡泽雄, 游利兵, ∗, 寸超, 王宏伟, 范军, 王琪, 张艳琳, 方晓东. 准分子激光低抖动延时同步系统[J]. 量子电子学报, 2023, 40(1): 69-78.
[12]	钟玉龙, 程庭清∗. LD 侧面泵浦 Tm:YAG 电光调 Q 激光的实验研究[J]. 量子电子学报, 2022, 39(5): 736-741.
[13]	张超, 韩亚帅, 周正仙, 屈军∗. 扭曲厄米-高斯-谢尔模光束对两种瑞利粒子的捕获[J]. 量子电子学报, 2022, 39(5): 742-751.
[14]	张艳琳, 游利兵, ∗, 王宏伟, 王琪, 胡泽雄, 范军, 方晓东, . 紫外超短脉冲的准分子激光放大技术[J]. 量子电子学报, 2022, 39(5): 677-686.
[15]	张瑞, 梅大江, ∗, 石小兔, 马荣国, 张庆礼, ∗, 窦仁勤, 刘文鹏, . YAG 晶体的位错研究进展[J]. 量子电子学报, 2022, 39(5): 687-706.

阵列靶防护取样面板热效应仿真分析

Simulation analysis of thermal effects of protective sampling panel for array target

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价