J4 ›› 2014, Vol. 31 ›› Issue (6): 683-689.

• 激光技术与器件 • 上一篇    下一篇

多模光纤激光靶面辐照匀滑特性研究

韩海啸1,许立新2,王声波3,徐腾1,林健1   

  1. 中国科学技术大学光电子科学与技术重点实验室,安徽 合肥 230026
  • 收稿日期:2014-03-25 修回日期:2014-05-01 出版日期:2014-11-28 发布日期:2014-11-17
  • 通讯作者: 许立新 博士,副教授,主要从事光纤通信子系统与器件、非线性光纤光学、超高速信号处理、光纤激光器与放大器等方面的研究。 E-mail:xulixin@ustc.edu.cn

Smoothness of target plane radiation coming out from multi-mode fiber laser

HAN Hai-xiao, XU Li-xin, WANG Sheng-bo, XU Teng, LIN Jian   

  1. Anhui key laboratory of optoelectronic science and technology, Hefei 230026, China University of Science and Technology of China, Department of Optics and Optical Engineering,
  • Received:2014-03-25 Revised:2014-05-01 Published:2014-11-28 Online:2014-11-17

摘要: 研究了基于光纤放大网络的激光惯性约束核聚变的靶面光场的均匀特性,采用透镜阵列匀滑多束多模光纤激光器集束后的光场,设计了合适的透镜阵列并进行相应的实验,获得聚焦后靶面处的极小光斑,其靶面光场顶部区域RMS(Root Mean Square)低于5%。同时实验上研究了靶面位置和集束激光器数目对匀滑效果的影响,合适的靶面位置和增加集束激光器数目能明显的改善匀滑效果。

关键词: 激光技术, 激光匀滑, 光纤激光器, 透镜阵列, 惯性约束聚变

Abstract: The study investigated the smoothness of the optical field on the target surface in the laser inertial confinement fusion based on fiber amplification network. The lens array was used to smooth the optical field generated by multi-beam multi-mode fiber laser after beam combining. The corresponding experiment was conducted with proper lens array. As a result, a small focused light spot was obtained on the target surface, with RMS less than 5% on the top region of the optical field. The experiment also studied how the target surface position and the number of beam combining lasers affected the smoothness of final optical field. Proper target surface position and the increased number of beam combining lasers obviously improved the smoothness.

Key words: Laser Techniques, Laser Smooth, Fiber Laser, Lens Array, Inertial Confinement Fusion