激光声表面波检测材料表面微缺陷数值研究

J4 ›› 2011, Vol. 28 ›› Issue (3): 362-368.

激光声表面波检测材料表面微缺陷数值研究

关建飞

南京邮电大学光电工程学院, 江苏南京 210046

收稿日期:2010-04-09 修回日期:2010-05-17 出版日期:2011-05-28 发布日期:2011-05-20
通讯作者: 关建飞(1979-)，山西阳泉人，讲师，博士，主要从事激光超声及其在无损检测中的应用等方面的研究工作。 E-mail:jfguan@yahoo.cn
基金资助:
江苏省高校自然科学基金(09KJB140005)；南京邮电大学引进人才项目(NY207005)资助

Numerical analysis of inspection of micro-surface crack by laser generated surface acoustic waves

GUAN Jian-fei

College of Optoelectronic Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210046, China

Received:2010-04-09 Revised:2010-05-17 Published:2011-05-28 Online:2011-05-20

摘要/Abstract

摘要：

采用平面应变的有限元模型数值模拟了激光线源辐照铝板表面激发出的声表面波的时域波形，比较了不同接收位置得到的位移信号的模式组成；同时研究了激光线源辐照区域近场存在表面微缺陷时产生的时域波形。数值结果说明：当激光源靠近表面微缺陷时激发出的声表面波模式中掠面纵波与瑞利波的位移信号均由典型的单极性迅速转变为显著的双极性特征，且瑞利波的峰-峰值将增加两倍左右，位移信号强度的显著变化为利用扫描激光检测材料表面微缺陷提供了理论依据。

关键词: 激光技术, 声表面波, 有限元法, 表面缺陷, 峰-峰值

Abstract:

Plane strain finite element method has been employed in this paper to simulate the generation of the surface acoustic wave by the line focused pulsed laser irradiation on the aluminates plate. The temporal displacemental signals on the plate surface have been calculated and compared with the waveforms obtained in the numerical model with a surface micro cracks introduced in the near field of the laser source. The numerical results demonstrate that the monopolar displacement signals of surface skimming longitudinal wave (sP) and Rayleigh wave (R) become the obvious bipolar signals, as there exists a surface micro defect in the immediate vicinity of the laser line source; in addition, the peak-to-peak value of the bipolar Rayleigh wave signal is enhanced about two times compared with the initial monopolar one. This dramatic transition can be the basis for the scanning laser line source inspection technique for shallow cracks.

Key words: laser techniques, surface acosutic wave, finite element method, surface crack, peak to peak value

中图分类号:

TN249
O426

关建飞. 激光声表面波检测材料表面微缺陷数值研究[J]. J4, 2011, 28(3): 362-368.

GUAN Jian-fei. Numerical analysis of inspection of micro-surface crack by laser generated surface acoustic waves[J]. J4, 2011, 28(3): 362-368.

参考文献

[1]. Dewhurst R J, McKie A D W, and Palmer S B, Further evidence for two-component surface acoustic wave reflections from surface breaking slots [J]. Appl. Phys. Lett., 1986,49(25):1694~1695
[2]. Clorennec D, Royer D and Walaszek H, Nondestructive evaluation of cylindrical parts using laser ultrasonics [J]. Ultrasonics, 2002, 40: 783-789.
[3]. Shan Q and Dewhurst R J, Surface-breaking fatigue crack detection using laser ultrasound [J]. Appl. Phys. Lett., 1993, 62(21): 2649~2651.
[4]. Jian X, Fan Y, Edwards R S and Dixon S, Surface-breaking crack gauging with the use of laser-generated Rayleigh waves [J]. Ultrasonics, 2002, 40: 783~789.
[5]. Kromine A K, Fomitchov P A, Krishnaswamy S, Achenbach J D. Laser ultrasonic detection of surface-breaking discontinuities: Scanning laser source technique [J]. Mater. Eval., 2000, 58(2) 173-177
[6]. Sohn Y, Krishnaswamy S, Mass spring lattice modeling of the scanning laser source technique [J]. Ultrasonics, 2002, 39:543~551
[7]. Sohn Y, Krishnaswamy S. Interaction of a scanning laser-generated ultrasonic line source with a surface-breaking flaw [J]. J. Acoust. Soc. Am., 2004, 115(1): 172~181
[8]. Arias I and Achenbach J D. A model for the ultrasonic detection of surface-breaking cracks by the scanning laser source technique [J]. Wave Motion, 2004, 39: 61~75.
[9]. Xu Baiqiang, Shen Zhonghua, Ni Xiaowu, Jian Lu and Wang Yawei, Finite element models of laser-generated surface acoustic waves in coating-substrate system [J]. J. Appl. Phys., 2004, 95(4): 2109~2115.
[10]. Shen Z H, Xu B Q, Ni X W, Lu J, Zhang S Y. Theoretical study on line source laser-induced surface acoustic waves in two-layer structure in ablative regime [J]. Optics and Laser Technology, 2004, 36(2): 139-143.
[11]. Wu X M and Qian M L, Simulation of the finite element method on wave propagation in cylinders [J]. Progress in Natural Science, 2001, 11: s265~268.
[12]. Zhao Y, Shen Z H, Lu J and Ni X W. Finite element simulation of laser-generated circumferential waves in hollow cylinder [J]. ACTA PHYSICA SINICA,(物理学报) 2007, 56(1): 321-326.
[13]. Ye Z M. A new finite element formulation for planar elastic deformation [J]. International Journal for Numerical Methods in Engineering, 1997, 40: 2579~2591.
[14]. Datta and Kishore N N, Features of ultrasonic wave propagation to identify defects in composite materials modeled by finite element method [J]. NDT&E International, 1996, 29(4): 213-223.

[1]	张艳琳, 游利兵, 王宏伟, 王琪, 胡泽雄, 范军, 方晓东, . 深紫外飞秒激光脉宽测量[J]. 量子电子学报, 2023, 40(4): 469-475.
[2]	张震, 段典, 陈雨君, 魏珊珊, 马金栋, 姚波, 毛庆和 . 基于窄带耗散孤子Figure-9 光纤振荡器和单级单模光纤放大器的皮秒脉冲光纤前端[J]. 量子电子学报, 2023, 40(4): 476-482.
[3]	唐敬玲, 齐月, 白振旭, 齐瑶瑶, 丁洁, 颜秉政, 王雨雷, 吕志伟, . 基于YAG/Nd: YAG/Cr4+: YAG 键合晶体的被动调Q亚纳秒激光器[J]. 量子电子学报, 2023, 40(4): 483-491.
[4]	曹冬梅, 李永放 . 领结状金纳米二聚体耦合共振特性研究[J]. 量子电子学报, 2023, 40(4): 606-613.
[5]	王长, ∗ , 宋高辉, , 谭智勇, , 曹俊诚, ∗. 基于半导体光子学器件的太赫兹成像技术研究进展 (封面文章}[J]. 量子电子学报, 2023, 40(2): 181-192.
[6]	陈雨君姚波刘昊炜魏珊珊毛庆和. 基于石英玻璃掺铥光纤的单纵模 DBR 光纤激光器的研制[J]. 量子电子学报, 2023, 40(1): 56-61.
[7]	魏士钦王瑶王梦真王芳刘俊杰刘玉怀. 基于阱式阶梯电子阻挡层的深紫外激光二极管性能研究[J]. 量子电子学报, 2023, 40(1): 62-68.
[8]	胡泽雄, 游利兵, ∗, 寸超, 王宏伟, 范军, 王琪, 张艳琳, 方晓东. 准分子激光低抖动延时同步系统[J]. 量子电子学报, 2023, 40(1): 69-78.
[9]	钟玉龙, 程庭清∗. LD 侧面泵浦 Tm:YAG 电光调 Q 激光的实验研究[J]. 量子电子学报, 2022, 39(5): 736-741.
[10]	张超, 韩亚帅, 周正仙, 屈军∗. 扭曲厄米-高斯-谢尔模光束对两种瑞利粒子的捕获[J]. 量子电子学报, 2022, 39(5): 742-751.
[11]	张艳琳, 游利兵, ∗, 王宏伟, 王琪, 胡泽雄, 范军, 方晓东, . 紫外超短脉冲的准分子激光放大技术[J]. 量子电子学报, 2022, 39(5): 677-686.
[12]	张瑞, 梅大江, ∗, 石小兔, 马荣国, 张庆礼, ∗, 窦仁勤, 刘文鹏, . YAG 晶体的位错研究进展[J]. 量子电子学报, 2022, 39(5): 687-706.
[13]	杨浩, 滕浩, ∗, 吕仁冲, 朱江峰∗, 魏志义, . 基于同心展宽器的飞秒啁啾脉冲放大研究[J]. 量子电子学报, 2022, 39(4): 566-573.
[14]	康仁铸, 吕仁冲, 滕浩, 朱江峰, 魏志义, . 基于改进的Frantz-Nodvik 方程的 Yb: KGW 再生放大器研究[J]. 量子电子学报, 2022, 39(4): 574-582.
[15]	张傲翔, 王瑶, 王梦真, 魏士钦, 王芳, 刘玉怀, . 具有M 形空穴阻挡层结构的AlGaN 基深紫外激光二极管性能优化[J]. 量子电子学报, 2022, 39(4): 583-590.